3 gari pīkstieni !

3 beeps beep, beep, beep [pause]

This beep pattern repeats until the system is powered off. Memory error

Reseat the memory.

Make sure that the contacts on the memory and the socket are clean.

Try removing one bank of memory modules at a time. (Some systems can require a memory module in Bank 0.)

Try using memory modules from the same manufacturer with the same part number and speed.

Check for a faulty memory module by trying the memory in a known good system.

https://www.intel.com/support/motherboards/desktop/sb/cs-010249.htm

šis rakstīts tavas plates manuālī!

BIOS Beep Code

The BIOS issues a beep code during POST if a memory error occurred. If a repeating beep code is

heard and the desktop board does not boot, see Table 9 for beep code descriptions.

Table 9. BIOS Beep Code

Number of Beeps Description

1 Refresh failure

2 Parity cannot be reset

3 First 64 K memory failure

4 Timer not operational

5 Processor failure (Reserved; not used)

6 8042 GateA20 cannot be toggled (memory failure or not present)

7 Exception interrupt error

8 Display memory R/W error

9 (Reserved; not used)

10 CMOS Shutdown register test error

11 Invalid BIOS (such as, POST module not found)

Nafig baterija?! Tev RAMs vai RAM sloti ir kaput. Rausti RAM moduļus, ne bateriju.

Iesākumā es tomēr ieteiktu pameklēt citus, ne no tava kompja, RAMus, bet, ja esi drošs, ka slotos vaina, tad vari savu plati mest misenē.

Atļaušos pieminēt, ka gar RAMiem vēlams grābstītes, kad no kompja izrauts barošanas vads…

Pameklē informāciju, pēc sava dēļa modeļu numura, dokumentācijas, ražotāju lapās parasti tas tiek pieminēts.

Nu tad nevis rausti, bet apskaties kāda stadijā ir RAM kontakti. Notīri hotj ar dzēšgumiju. Pamēģini palaist sākuma ar vienu, tad otru ram-u pa vienam.

Izņemt un ielikt vari kartupeļu stremeles fritējamajā pannā.

Kompis ir vizuāli jāredz, lai varbūtība atrast diagnozi būtu vismaz 40%. Pagaidām tā ir ap 5.