you will need to be allot more specific on what you are trying to do here.
what is the difference in amps.
what is the device
Generally speaking it is good practice to only use the power supply that the device is rated for.
the biggest issue you will have is this
Power = voltage * current (simple version)
if the power supply you had was 12v at 1 amps then you ca supply 12Watts of power
if the power supply you had was 12v at 10 amps then you can supply 120Watts of power
Just because you can supply 10 amps, and all you need is one, means your power supply is bigger than it needs to be. The device will draw what it is intended to draw. Just make sure the voltage matches.?
Uz jautājumu pēc būtības atradu atbildi – bet tas radīja jaunu jautājumu… kur paliek 3/4 enerģijas, ko adapteris saražo lieki? Negribu, lai adapters sāk pārlieku karst un pārvērsties plācenī…
.
